machining heavy duty dragline excavator spare parts hot long spur large module gear rack

Introduction to towed machining heavy duty dragline excavator spare parts hot long spur large module gear rack

A towed excavator, also known as a tracked or tire mobile excavator, is a type of heavy equipment that is widely used in the construction and mining sectors.machining heavy duty dragline excavator spare parts hot long spur large module gear rack refers to a variety of parts that are used to maintain, repair, or replace worn-out parts of this machine.

Features and advantages of towed machining heavy duty dragline excavator spare parts hot long spur large module gear rack

Durability: made of high-quality materials to ensure long life and high durability.

Compatibility: Designed to meet OEM specifications for a wide range of makes and models.

Economical: Third-party spare parts are usually less expensive compared to OEM parts.

Ease of Replacement: Standardised design allows for quick and easy installation and replacement.

Reliability: rigorously tested to ensure stable and reliable performance.

(machining heavy duty dragline excavator spare parts hot long spur large module gear rack)

Specification of machining heavy duty dragline excavator spare parts hot long spur large module gear rack

The Specification of Machining Heavy Duty Dragline Excavator Spares

The heavy-duty dragline excavator is a powerful piece of equipment that is used in various construction and mining applications. As such, it requires specialized spare parts that can withstand the wear and tear caused by frequent use. This article provides an overview of the specifications for machined heavy-duty dragline excavator spare parts.

The primary purpose of these spare parts is to ensure that the excavator continues to operate efficiently and effectively over time. These parts include large modules gear rack, long spur spurs, and other critical components.

The Specification of Large Modules Gear Rack

The large modules gear rack is a vital component of the heavy-duty dragline excavator. It provides support for the excavator’s lifting mechanism and helps to maintain the machine’s stability while operating. The rack is made from high-quality materials and has been designed to meet the specific requirements of the heavy-duty dragline excavator.

The specification of the large modules gear rack includes:

– Material: Steel or aluminum with a high load-bearing capacity.
– Strength:≥50kN/m² (490kN/ft³)
– Width:≥125mm (5 in.)
– Depth:≥600mm (24 in.)
– Height:≥1800mm (72 in.)

The Specification of Long Spur Spurs

The long spur spurs are another essential part of the heavy-duty dragline excavator. They are used to transfer power from the engine to the excavator’s lifting mechanism, ensuring that the machine moves smoothly and efficiently. The spurs are also important for maintaining the machine’s speed and traction during operation.

The specification of the long spur spurs includes:

– Material: Chrome or stainless steel.
– Strength:≥30kN/m² (290kN/ft³)
– Length:≥20mm (0.8 in.)
– Material: Stainless steel
– Length:≥50mm (2 in.)
– Material: Chrome or stainless steel
– Length:≥100mm (4 in.)
– Material:Chrome or stainless steel
– Length:≥200mm (8 in.)

Conclusion

The Specification of Machined Heavy Duty Dragline Excavator Spares plays a crucial role in ensuring that the excavator operates efficiently and effectively over time. These spare parts include large modules gear rack, long spur spurs, and other critical components. By carefully selecting and using these parts, operators can extend the life of their excavators and reduce downtime associated with maintenance.

(machining heavy duty dragline excavator spare parts hot long spur large module gear rack)

Applications of machining heavy duty dragline excavator spare parts hot long spur large module gear rack

The applications of machining heavy-duty dragline excavator spare parts are numerous and varied, depending on the specific requirements of each application. Some common applications include:

* Rebuilding and repairing wear and tear on heavy-duty dragline excavators, such as engine components or transmission parts.
* Applying new designs to existing heavy-duty dragline excavators, such as improving their fuel efficiency or adding new safety features.
* Developing new types of heavy-duty dragline excavator spare parts, such as those designed for extreme environments like underwater or in dusty environments.

Hot-long spurs are one type of heavy-duty dragline excavator spare part that is commonly used in these environments. These spurs are made from high-strength steel and have a long, slender design that allows them to easily access deep pockets of dirt and debris. They can be inserted into excavator cavities and then removed to clean them out with water or other cleaning agents.
Large module gears are another type of heavy-duty dragline excavator spare part that is often used to lubricate important moving parts in excavators. These gears are typically made from metal and are designed to reduce friction between them and increase their lifespan. They can be used to provide smooth and reliable operation for excavators, even in extreme conditions.
Finally, gear rack systems are also used to help protect heavy-duty dragline excavators during use. A gear rack system consists of a series of gears arranged in a particular configuration, which helps to distribute weight and maintain balance. This can be especially useful for excavators that operate at high speeds or under heavy loads, where the added weight can cause instability.
In conclusion, the applications of machining heavy-duty dragline excavator spare parts are wide-ranging and varied, and they play an important role in ensuring the longevity and reliability of these powerful machines. Whether you’re looking to repair or upgrade worn or damaged parts, or simply want to develop new types of parts to meet your specific needs, there’s sure to be a hot-long spur or large module gear or gear rack solution available.

Company Introduction

Established in 2007, Excavator Attachments Heavy Machinery Co.,ltd. focus on metal research and mining machinery spare parts. 2 factories over an area of 13,300 square meters, based on 100+ sets of equipment, our production capacity reaches 12000 Tons/Year. has passed ISO 9001 quality managment system certification in 2008.

Our mainly products are dragline excavator spare parts,rotary kiln spare parts, large modulus gear (gear shaft), gearbox ect. 40+ patents with over 45 years experience to help focus on improve the service life of spare parts. We belive that more than 80% reason of mechanical parts’ working life depends on hot processing (steel making/forging/casting/welding/heat treatment). Eight material engineers will control the quality from the original resource.

If you are interested, please feel free to contact us.

5 FAQs of machining heavy duty dragline excavator spare parts hot long spur large module gear rack

1. What are the primary benefits of using our hot deep spurs?
2. How does the large module gear rack differ from other options on the market?
3. What is the size and weight capacity of our spare parts?
4. Are our gears and shafts made with high-quality materials for durability and longevity?
5. Can we request custom designs for our spare parts? If so, what is the process?

(machining heavy duty dragline excavator spare parts hot long spur large module gear rack)